Top 10 Best Gaming Cabinet Under 10000 Review | 2021

Choosing the Best Gaming Cabinet Under 10000 is Very difficult and important for your PC building that will decide your system is future proof or not. Because Cabinet is like Box what you can fit and no of the component in it so that you can make your desirable Gaming PC and Future Proof also.

You can go with these especially Best Two that are built with minimalist design and Liquid cooler support also,

What to remember before buying Best Gaming Cabinet Under 10000

  1. You should check the Cabinet motherboard support compatibility means which motherboard can be supported by this gaming cabinet. If the cabinet supports your motherboard form factor or higher you can go without any hesitation. Ex.- If your motherboard Form factor is Micro-ATX, means you can choose Micro-ATX or ATX support cabinet.
  2. If you want to play games by creating a gaming environment you should always select an RGB gaming cabinet that will provide you a flash of RGB lighting that will give you a feeling of a gaming environment.
  3. How many fans support this cabinet, while playing a game you will need a sufficient cooling system to get continuous best gaming performance. More fan will consume more power but still will it cool your system and protect your system from excessing heating.
  4. Storage is more important because playing high definition games will require more storage with its running instant response. so always check how many strays are given in the cabinet that you are looking for and select as much more storage device compatibility.

Check all of the above points then find which is the best one for you in these 10 Best Gaming Cabinet under 10000 that is Given Below.

Let’s go and take overview the all cabinets in detailed review,

Top 10 Gaming Cabinet Under 10000

  1. Thermaltake V200 Tempered Glass RGB Case
  2. Corsair iCUE 220T RGB Airflow Tempered Glass Case
  3. Corsair Carbide 275R Case
  4. DEEPCOOL MATREXX 55 MESH ADD-RGB 4F Case
  5. Cooler Master MasterBox TD500 Mesh Triple ARGB Case
  6. CORSAIR 275R Airflow Tempered Glass Case
  7. Antec NX800 ARGB Case
  8. Thermaltake S300 Tempered Glass Snow Edition Case
  9. Cooler Master Box MB511 RGB Case
  10. Cooler Master MasterBox MB311L ARGB Airflow Case

1.Thermaltake V200 RGB Case

Thermaltake V200 RGB Case

Highlight Points

  • Its dimension 48.9 x 48.9 x 26.2 cm
  • Weight 7.08 Kilograms
  • Support ATX, Micro-ATX, Mini-ATX form factor Motherboard
  • RGB Fans control with 16 modes

Short Review

Thermaltake V200 RGB Cabinet Support ATX, Micro-ATX, Mini-ATX form factor Motherboard, it comes with Edge-to-Edge Transparent left side Glass Panel having its low thickness 4mm that gives immersive looks.

Cabinet provide two USB 3.0, one HD Audio ports and RGB light button on the top panel of case. You can control RGB effect by RGB switch board which is in-built that will deliver a ultimate RGB lighting effect.

Its RGB sync with Asus Aura Sync, Gigabyte RGB Fusion, MSI mystic light sync, ASRock RGB LED and Biostar Vivid LED Dj that all will provide a better experience RGB effect or Fusion.

You will get 16 modes, Customise RGB using input/Output port RGB light button

  • Mode 1 : RGB Lightning
  • Mode 2-8 :Single color (Red, Yellow, Green, Cyan, Blue, White, Purple)
  • Mode 9-15 : Breath (Red, Yellow, Green, Cyan, Blue, White, Purple)
  • Mode 16 : Light Off

Cabinet has a magnetic dust filter that provides dust-free air for the cooling system and flows out air using cooling fans. It is pre-installed with three RGB 120mm fans in the front panel that can be controlled by using the I/O port RGB button or by synchronizing with your RGB capable Motherboard.

Also, a pre-installed rear normal fan and you can install externally two RGB 120mm fans in the top panel of the cabinet. RGB capable motherboard recommended for you, ASUS, GIGABYTE, MSI, ASRock, and BIOSTAR.

You can use only Micro ATX or a lower motherboard for its better compatibility. You will get Storage three drive bays in the right panel of the cabinet to fit SSDs or HDDs. Best gaming Cabinet Under 10000.

2.Corsair iCUE 220T RGB Case

Corsair iCUE 220T RGB Case

Highlight Points

  • Its dimension 39.5 x 21.01 x 45.01 cm
  • Weight 6.5 Kilograms
  • Support ATX, Micro-ATX, Mini-ATX form factor Motherboard
  • High Airflow Designed Cabinet

Short Review

Corsair iCUE 220T RGB Cabinet Support ATX, Micro-ATX, Mini-ATX form factor Motherboard, it comes with Edge-to-Edge Transparent left side Glass Panel having its low thickness 4mm that gives immersive looks and showcase of your component with RGB lighting.

To your PC lightning, you will get three pre-installed Corsair SP120 RGB Pro fans that are individually lined up with 24 RGB LED overall. You can control your RGB lighting, make your PC brilliant lighting effect of your PC case with Corsair iCUE software.

It’s built with 220T RGB airflow solid steel and front plate that ensures sturdy and strong enough to deal with the illness with an immersive look. And also will provide a High-Air flow with a steel grill front panel to get optimal air intake.

A full-length PSU cover hides your Computer power supply and cables cut out of sight, making it easy to PC build a professional-looking system without providing excess clutter.

The cabinet is roomed for up to six 120mm Fans, four 140mm fans, or multiple radiators (Including 3 pre-installed front panel fans and a 360mm radiator in the front). Best Gaming Cabinet Under 10000 with its high airflow.

You will be provided two 2.5in trays and two more trays in a removable cage that fit an additional 3.5in or 2.5in drives to use a Hard drive or Solid storage device. Removable dust filters will be available on the floor, roof, and front to keep your computer system clean for many years after the PC build is finished.

Also Read : Best Gaming Cabinet Under 5000

3.Corsair Carbide 275R Case

Corsair Carbide 275R Case

Highlight Points

  • Its dimension 44.6 x 21.11 x 45.5 cm
  • Weight 454 Grams
  • Support ATX, Micro-ATX, Mini-ATX form factor Motherboard
  • Steel Drive Bay

Short Review

Corsair Carbide 275R Case Cabinet Support ATX, Micro-ATX, Mini-ATX form factor Motherboard, it comes with Edge-to-Edge Transparent left side Glass Panel having its low thickness 4mm that gives immersive looks and showcase of your component with RGB lighting.

It is designed with room for up to six 120 mm cooling fans you can use three 120mm fans in the front panel, two on top and one in the rear or you can room up with two 1400mm fan in the front panel. Also can use a 360/280mm radiator in front, a 240mm radiator on the top, and a 120 mm radiator in the rear.

You will have to provide a four 2.5″ betray steel tray and two 3.5″ stray steel tray for your storage space. Designed like to direct airflow to the hottest component without providing any interference from your other device.

A full-length PSU cover hides your Computer power supply and cables cut out of sight, making it easy to PC build a professional-looking system without providing excess clutter.

Removable dust filters will be available on the floor, roof, and front to keep your computer system clean for many years after the PC build is finished. You will be provided by two normal fans with this cabinet. Best Gaming Cabinet Under 10000.

4.DEEPCOOL MATREXX 55 RGB Case

Highlight Points

  • Its dimension 48.9 x 48.9 x 26.2 cm
  • Weight 7.08 Kilograms
  • Support E-ATX, ATX, Micro-ATX, Mini-ATX form factor Motherboard
  • Liquid Cooler Support

Short Review

DEEPCOOL MATREXX 55 RGB Cabinet Support ATX, Micro-ATX, Mini-ATX form factor Motherboard, it comes with Edge-to-Edge Transparent left side Glass Panel and front panel having its low thickness 4mm that gives immersive looks and perfectly show off your internal components.

It comes with an expandable RGB lighting system and an in-built pre-installed RGB strip in the front panel that can easily be controlled by using Button or Motherboard. And you can also add on more RGB devices by including two RGB connectors.

It features massive cooling compatibility by optimizing airflow with large air intakes on the side of the front panel and exhaust air through the back and top to keep your component cool and with less temperature.

Liquid Cooler Support

  • 120/140/240/280mm radiator liquid cooling system on the top
  • 120mm radiator liquid cooling system in the rear
  • 120/140/240/280/360mm radiator liquid cooling system in the front

Fan Support

  • 2×120/2×140mm fan on the top
  • 1×120mm fan in the rear
  • 3×120mm or 3×140mm fan in the front

Power Supply Unit cable will hide by steel panel to keep your system clean and show off good looks. A magnetic dust filter will be provided in the top panel that offers you easy removal and cleaning.

It has one USB 3.0, One USB 2.0, Audio(HD), Mic, Reset button, RGB button, and Power ON/OFF button on the front panel. It also supports a 370mm maximum Graphic card.

You will get two 3.5″ drive bay for HDDs storage and two 2.5″ Drive Bays for SSDs storage. you can also use 3.5″ Drive Bay for a 2.5″ Storage device. Best Gaming cabinet under 10000.

5.Cooler Master MasterBox TD500 ARGB Case

Cooler Master MasterBox TD500 ARGB Case

Highlight Points

  • Its dimension 49.3 x 21.7 x 46.9 cm
  • Weight 7.76 Kilograms
  • Support E-ATX, ATX, Micro-ATX, Mini-ATX form factor Motherboard
  • Crystalline Tempered Glass
  • Liquid Cooler Support

Short Review

Cooler Master MasterBox TD500 ARGB Cabinet Supports E-ATX, ATX, Micro-ATX, Mini-ATX form factor Motherboard, it comes with Edge-to-Edge Transparent left side Glass Panel having its low thickness 4mm that gives immersive looks.

It’s RGB lighting is complete with new perspectives by the helping of front and side panels that features crystalline structure and designed with unique hardware that lighting depending on the viewing angle.

The cabinet is pre-installed with three ARGB 120mm fans in the front panel recommend motherboard for better compatibility ASUS, Gigabyte, MSI, and ASRock.

Air intake from the front panel in large amounts and throughout the top and rear cooler providing better cooling and prevent from overheating your components.

The polygonal mesh design of this cabinet features a three-dimensional contour that’s not only aesthetical but it is capable of simultaneously providing high airflow and dust filtration.

Its crystalline design spans the edges of the tempered glass side panel, precision-designed for better strength as well as aesthetics.

It can room up-to two 360mm radiators on the top and front panel to keep your system extremely cool by enabling stable performance even during peak usage. It also supports up to seven 120mm fans and 360mm front and top radiator and rear liquid cooling too.

You will get 2 x 3.5’’/2.5’’ Combo HDD and 4 (2 + 2) x 2.5’’ SSD drive bays. It can support up to a 410mm graphics card and up to a 180mm PSU in length enabling room for upgrades.

Its also comes with 2 x USB 3.2 Gen 1 (USB 3.0), 1 x 3.5mm Audio Jack, 1 x 3.5mm Mic Jack , 1 x ARGB 2-to-3 Splitter on the top polygon shape panel.Best Gaming Cabinet under 10000.

Must Read : Top 10 Best Gaming Monitor Under 20000

6.CORSAIR 275R Airflow Case

CORSAIR 275R Airflow Case

Highlight Points

  • Its dimension 45.7 x 21.6 x 45.5 cm
  • Weight 6.9 Kilograms
  • Support ATX, Micro-ATX, Mini-ATX form factor Motherboard
  • Liquid Cooler Compatible

Short Review

CORSAIR 275R Airflow Cabinet supports ATX, Micro-ATX, Mini-ATX form factor Motherboard come with Edge-to-Edge Transparent left side Glass Panel having its low thickness 4mm that gives immersive looks.

You can customize and synchronize RGB lighting effects by using corsair iCUE software when you will connect CORSAIR RGB fans and lighting strips for an amazing system-wide light-show.

A slatted and simple front panel design will allow high airflow into your system for more efficient cooling and maintaining component temperature. Cabinet comes with pre-installed three 120 mm cooling fans, the two fans at intake, and one at the rear.

Its clean and modern styling design, with each and every angle ventilation pattern and a transparent tempered glass Side panel that provides an immersive look to your inner component with RGB lighting.

You can install up to six 120mm cooling fans or four 1440mm fans or three radiators in sizes up to 360mm. It provides drive trays accommodate up to two 3.5″ HDDs and two 2.5″ SSDs, with two additional 2.5in mounts.

Once your PC build is finished, the 275R cabinet airflow will help you to keep your system clean and tidy with simplicity, intuitive cable routing, and three removable dust filters. Best Gaming Cabinet Under 10000.

7.Antec NX800 ARGB Case

Antec NX800 ARGB Case

Highlight Points

  • Its dimension 55.25 x 29.85 x 55.88 cm
  • Weight 9.31 Kilograms
  • Support E-ATX, ATX, Micro-ATX, Mini-ATX form factor Motherboard
  • Radiator Support

Short Review

Antec NX800 ARGB Cabinet supports ATX, Micro-ATX, Mini-ATX form factor Motherboard come with Edge-to-Edge Transparent left side Glass Panel having its low thickness 4mm that gives immersive looks.

You can customize ARGB lighting first by connecting the module with the motherboard for changing various colors in sync and controlling by LED Control Button.

Cabinet provides One USB 3.0, Two USB 2.0, Audio/Mic Ports, LED Control Button, and Reset Button on the top panel. You can install seven Horizontal and three Vertical Graphic cards.

Radiator Support

  • Up to 280mm on Top
  • Up to 140mm Rear
  • Up to 360mm Front

Cooling Fan Support

  • Up to 3x120mm/3x140mm/2x200mm Front
  • 2x120mm/2x120mm Top
  • 1x120mm/1x140mm Rear

Cabinet comes with Two 200mm ARGB Fans in Front and One 120mm RGB in Rear pre-installed. You can use Four 2.5″ SSDs and Three 3.5″HDD/2.5″ SSD and Graphics card Up to 350mm and CPU Cooler up to 180mm and PSU Up to 200mm. Best Gaming Cabinet Under 10000.

Also Read : Best Gaming Motherboard for Your PC

8.Thermaltake S300 Case

Thermaltake S300 Case

Highlight Points

  • Its dimension 62.4 x 59.6 x 33.9 cm
  • Weight 13.3 Kilograms
  • Support ATX, Micro-ATX, Mini-ATX form factor Motherboard
  • Modern Steel Cabinet

Short Review

Thermaltake S300 Cabinet supports ATX, Micro-ATX, Mini-ATX form factor Motherboard come with Edge-to-Edge Transparent left side Glass Panel having its low thickness 4mm that gives immersive looks.

The cabinet is built with a full metal front panel that provides a simple and elegant design. It is built with a PSU cover that will provide a ventilated design to improve airflow and hide all the cable of the Power Supply Unit.

It has an integrated riser Graphics Card support bracket that will not only prevent your graphic card from sagging but it will also help to reduce weight on the Motherboard graphics PCIe slots.

This cabinet has come with one extra feature that you can rotate your PCIe slot either you can choose your vertically installed or horizontally which will help you to gain flexibility for your system.

Its side transparent glass built to be more durable, scratch-resistant, and also with clear transparent for a view of all components that you installed. Two magnetic filter one on top and another one on the bottom that will protect your all component with reducing dirt also.

It supports a Maximum height of CPU cooler 170mm, a Dual VGA expansion slot up to 360mm without a reservoir, and power supply length up to 200mm. You can optimize the cooling capability of your fan that will you build your high-end system.

you can install 10 120mm fans (including one normal 120mm fan pre-installed in the rear).

Radiator Compatibility

  • 120/240/360/140/280mm in Front
  • 120/240/360/140/280mm on Top
  • 120mm in Rear
  • 120/240/360mm in Right

Fan Compatibility

  • 3×120/3×140/1x200mm in Front
  • 3×120/2×140/1x200mm in Top
  • 1×12/1x140mm in Rear
  • 3x120mm on Right

You will get one USB 3.0, Two USB 2.0, One Mic Jack, One Audio Output Jack, and a Power On/Off Button on the top of the cabinet. Also will provide drive bays for your storage, 2×3.5/2.5″ (HDD Rack), 2×3.5″ (Without HDD Rack), and 2×2.5″ (HDD Bracket).

9.Cooler Master MB511 RGB Case

Cooler Master MB511 RGB Case

Highlight Points

  • Its dimension 49.61 x 21.69 x 46.91 cm
  • Weight 7.03 Kilograms
  • Support ATX, Micro-ATX, Mini-ATX form factor Motherboard
  • RGB Fans control without Motherboard Supportability

Short Review

Cooler Master MB511 RGB Cabinet supports ATX, Micro-ATX, Mini-ATX form factor Motherboard come with Edge-to-Edge Transparent left side Glass Panel having its low thickness 4mm that gives immersive looks.

Cabinet comes with three RGB 120mm LED fans that are pre-installed in the front panel to create a better lighting effect and one RGB controller is included. If your Motherboard doesn’t support RGB controlling function, you can use the RESET button and connect to RGB lighting directly through the Input and output panel.

Mesh front panel is given that will offer high and efficient airflow for cooling components and ventilation holes on the top of the cabinet. The cabinet supports a CPU cooler height up to a 165mm, Graphics Card Length up to 410mm, and Power Supply length up to 180mm.

You can use Three 120mm or two 140mm fans and up to 360mm radiator up to thickness 50mm in Front Panel, Two 120mm or Two 140mm and 120/240mm radiator on the Top, AND One 120mm fan or radiator in Rear (Including Pre-installed).

It has 7 Expansion slots, You can use Two 2.5″/3.5″ Drive Bays and also Two 2.5″ Drive Bays for your running storage. It comes with Two USB 3.0, Audio In and Out to support HD audio quality. Second last Best Gaming Cabinet under 10000.

Gaming : Here Is the Best Gaming Processor for Professional Gaming

10.Cooler Master MB311L ARGB Case

Cooler Master MB311L ARGB Case

Highlight Points

  • Its dimension 49.30 x 21.70 x 46.90 cm
  • Weight 6.46 Kilograms
  • Support Micro-ATX, Mini-ATX form factor Motherboard
  • Radiator Support

Short Review

Cooler Master MB311L ARGB Cabinet support Micro-ATX, Mini-ATX form factor Motherboard come with Edge-to-Edge Transparent left side Glass Panel having its low thickness 4mm that gives immersive looks.

Cabinet Fine Mesh design on the front panel is capable to provide efficient airflow while filtering out dust from your systems. It comes with dual pre-installed 120mm ARGB fans with a splitter that can be managed by your motherboard, to create your customized ARGB lighting system.

You are able to free moving of drive cage either you can shift it toward in front PSU space, Backward to provide more radiator space or even you can remove it from the cabinet completely.

This support up to Six fans in the front, rear, and top, and the radiator also will support to ensure that you don’t compromise with performance. It can support Graphics Card up to 340mm length, CPU fan up to 166mm Height, and PSU up to 325mm length.

Radiator Support

  • 120/240mm on Top
  • 120/140/240/280mm in Front
  • 120mm in Rear

Fan Support

  • 2×120/140mm on Top
  • 3×120/2x140mm in Front
  • 1x120mm in Rear

A small ARGB controller that will allow you to customize RGB like Fans and LED strips of your system without any ARGB capable motherboards. This controller comes with 14 lighting preset that provide full uses to control LEDs of your system and even you can switch off your system by using this.

It comes with Two USB 3.2 Gen 1, One 3.5mm Audio Jack, One 3.5 Mic Jack, One ARGB 2to3 splitter, and One ARGB controller to control your RGB lighting. It provides Two 2.5″/3.5″ Drive Bays and Two 2.5″ Drive Bays for your running space. This is the last Best Gaming Cabinet under 10000.

You got an idea about all of these above Top 10 Best Gaming Cabinet Under 10000 and find the best one for you also.

isn’t it?

I will recommend these are two best Gaming cabinet that will match your requirement definitely, You can choose the Corsair iCUE 220T RGB cabinet if you want a new unique design with better RGB lighting. Otherwise, you can go with Cooler Master MasterBox TD500 Mesh Triple ARGB Cabinet.

Choice is Yours!

“Good Luck for PC Building”

Must Read : Best Monitor for Video-Editing & Gaming.

Leave a Reply